mb11logo.jpg

Home
Off-Road Services
Street Services
Products
Service Form
About MB1
MB1 Setup Tips
Press
Technical
Dyno Information
Rider Support
Testimonials
Dealers
Trackside Support
Rider History Gallery
MB1 Racing History
Shipping
Contact US

48MM KYB WORKS SUSPENSION KIT

kit.jpg
kit2.jpeg

We take your existing production suspension and turn it into a High Performance Suspension Kit! This kit is the best suspension component available in the production unit. Low friction works DLC Coatings are applied to your lower fork tubes and shock shaft. Friction is reduced and what you get is better small bump absorption and smoother feel. This is the same coating used by Ricky Carmichael, James Stewart and most other Factory Riders and Teams.  This coating is also harder than the OEM Chrome which helps seal life and prevent rock scratches and nicks on your lower tubes. This kit is perfect for the person looking for top performance from their suspension component and does not want to invest in the Higher priced Factory Kit suspension. You get a plusher and more progressive feel with this MB1 High Performance kit. This kit with the performance parts included is not available from any other suspension supplier. We only use High Performance OEM Parts..

Whether you ride Motocross, Supercross, Arenacross, Supermoto, GNCC, Desert, Enduro, Trail or Hare Scrambles, the MB1 High Performance Suspension Kit will improve the performance of your suspension! Call us today for any questions or to order your suspension kit today!

Applications:

Kawasaki:    2006-2011 KXF450
Yamaha:      2006-2011 YZ125-250-YZF250F/450F
Honda:        2009-2011 CRF450

Fork Service & Parts
Kayaba Twin Chamber
48mm DLC Coated Lower Tubes with Tighter Fork Tolerances ( Some models have DLC Coating)
MB1 Works Revalve Setting & Spring Setup
Genuine OEM Fork Fluid
Hardcoat Anodized Axle Lugs (Comes in black)
Kayaba Works Spring Seat Perch
Dark Kashima Coated Outer Tubes (Optional)
Works KYB Fork Caps & Adjuster 
Works KYB Pressure Springs
Works KYB Oil Locks
Wear Parts measured and replaced with High Performance Oem parts
Shims measured and replaced if necessary

Shock Service & Parts
16-18mm DLC Shock Shaft Coating
MB1 Works Revalve Setting & Spring Setup
Genuine Oem Shock Fluid (2.5w)  Best Performance.
Works KYB Kashima Coated Shock Damper Case (Some models)
Hard Anodized Shock Body.
Works Bladder Cap (Some models)
Works Shock Piston
Compression Adjuster Plate and Spring
Works KYB Shock Clevis (Some models)
Works KYB Bump Rubber Kit (16 and 18mm available)
Works KYB Preload Shock Collars. (46mm and 50mm available.)
MB1 Instruction Booklet
MB1 Shock Sticker