|
NEW X-Ring Removal Tool
2010 RMZ X Ring removal tool makes it
easy to remove the piston assembly from the body without damaging the expensive X Ring.
Retail: $14.99
_________________________________________________________________________________________________
Fork Cap Wrench
Available for Showa, WP, WP Dual Chamber, KYB Dual Champer or Sport Bike.
Retail: $44.99
_______________________________________________________________________________________
Fork Seal Driver
These rugged Seal Drivers are the standard of the industry. Required if you are replacing
seals or bushings.
Retail: $74.99
_______________________________________________________________________________________
Fork Bleeding Tool
Unique self starting design easily threads onto the damping rod. Baffled so the oil runs
down the rod eliminating the typical mess. Available as a set.
Retail: $34.99
_______________________________________________________________________________________
Cartridge Rod Clamp Tool
This cartridge rod clamp tool is used to hold all common sizes of cartridge rods. Can also
be used for shock shafts, damping rods, etc. This design allows for easy installation of dowels into the top of the vise jaws.
The holding tools hang on the dowels instead of dropping on the ground when the vise is opened.
Retail:
$59.99
_______________________________________________________________________________________
KYB Dual Chamber Compression Tool
This tool removes the compression body from the cartridge on KYB dual
chamber KYB forks.
Retail: $29.99
_______________________________________________________________________________________
Cartridge Rod Clip Tool
This cartridge rod clip tool allows for the easy removal of the rebound adjuster. This tool
will work with 10, 12 and 12.5mm rods.
Retail: $19.99
_______________________________________________________________________________________
Preload Adjuster Tool
This tool is specifically designed to fit current preload collars to prevent damage.
Retail:
$59.99
_______________________________________________________________________________________
Shock Seal Bullet Tool
This bullet tool makes seal head installation onto shafts quick and easy. Practically eliminates
the possibility of seal damage when installing the seal head onto the shaft.
Retail: $16.99
_______________________________________________________________________________________
Bladder Removal Tool
This tool screws onto the shrader valve for easy removal of the bladder cap. Simply screw this
tool onto the shrader valve and pull the bladder from the body.
Retail: $29.99
_______________________________________________________________________________________
Shock Seal Head Setting Tool
This tool allows foe easy installation of most shock seal head assemblies. Available in three sizes:
Mini's, Standard and WP PDS Shocks.
Retail: $49.99
_______________________________________________________________________________________
Compression Adjuster Tool
Compression adjuster sockets allows for easy removal of compression adjusters. Available for KYB or Showa.
Retail: $29.99
_______________________________________________________________________________________
Nitrogen Pressure Gauge
Std Gauge
Reatil: $129.99
_______________________________________________________________________________________
Nitrogen Gauge Needle Assembly
Retail: $49.99
_______________________________________________________________________________________
MB1 Cylinder
Used to measure accurate suspension fluid. Used by top suspension technicians. Easy
pour Spout.
Retail: $19.99
|
