HomeServicesProductsMini Works Suspension Kits & ProductsShippingMB1 FormsSupport RidersTrackside SupportPressMB1 Setup TipsRider SupportDealersContact USAbout MB1

47MM Showa Works Performance Kit

showa.jpg

newfork11.JPG

worksshk.jpg

We take your existing production suspension and turn it into a High Performance Suspension Kit! This kit is the best suspension component available in the production unit. Low friction works DLC Coatings are applied to your lower fork tubes and shock shaft. Friction is reduced and what you get is better small bump absorption and smoother feel. This is the same coating used by Ricky Carmichael, James Stewart and most other Factory Riders and Teams.  This coating is also harder than the OEM Chrome which helps seal life and prevent rock scratches and nicks on your lower tubes. This kit is perfect for the person looking for top performance from their suspension component and does not want to invest in the Higher priced Factory Kit suspension. You get a plusher and more progressive feel with this MB1 High Performance kit.. Different option colors are available for your kit as you get to customize your suspension to your liking.This kit with the performance parts included is not available from any other suspension supplier. We only use High Performance OEM Parts..

Whether you ride Motocross, Supercross, Arenacross, Supermoto, GNCC, Desert, Enduro, Trail or Hare Scrambles, the MB1 High Performance Suspension Kit will improve the performance of your suspension! Call us today for any questions or to order your suspension kit today!

Fits Most Current Showa Model Suspensions
  
                     
Fork Service & Parts
*47mm Production based front forks
*MB1 Revalve Setting & Spring setup
*DLC Coated Lower Slide Pipes
*Hard Anodized Axle Lugs
*OEM High Performance Showa Pressure Springs
*Showa Works Oil lock collars 
*Showa Fork Spring preload spacers 
*Fork Mod Spring guide sx or mx
*Fork Wear Parts measured and replaced if necessary
*Showa Works Fork Fluid (5Wt)
*MB1 Showa Fork Stickers
*MB1 Suspension setup instruction booklet
*Fatigued Shims replaced

Shock Service & Parts
*16mm and 18mm Production Based Shocks
*MB1 Revalve Setting & Spring setup
*DLC Coated Shock Shaft
*Hard Anodized Shock Body 
*Showa Works Bladder Cap
*Showa Works Bladder 
*Works Aluminum Preload Rings
*Hard Anodized Shock Clevis (Option colors available)
*Workls Kit shock Clevis Available
*Works Check Valve Shock End Nut
*New Heavy Duty Bump Rubber
*Shock Wear Parts Measured and Replaced with OEM Parts (Oil Seal-Dust Seal-Bushing-Orings)
*Shock Piston band and oring replacement for performance and consistency.
*Works Showa Shock Fluid (2.5wt)
*Fatigued Compression & Midvalve Shims replaced
*MB1 Instruction Booklet on setup and direction help
*MB1 Showa Shock Sticker

Please call for pricing.. 

2009 Team MB1 Rider Ben Evans
evansrd1.jpg