
SHOWA PRESSURE
SPRINGS
Twin-Chamber forks are capable of delivering works level
performance when set up correctly. These
parts will deliver a PLUSHER ride guaranteed!
These parts change the internal pressure system inside
the cylinder cartridge. This will improve plushness character on flat, rough corners and retain rider control
and stability. These are OEM Springs that do not sack out like the other pressure springs on the market. Hi tension OEM Spring
material that is a must for any fork.
Applications-SUPERCROSS-MOTOCROSS-SUPERMOTO-OFFROAD-FREESTYLE-WORCS-DESERT-TRAIL
Selection of rates available. Call
for personal application.
Available in 1.42kg-1.61kg-1.71kg-1.9kg-2.1kg.
Honda: 98-07 CR250,04-09 CRF250R/X, 02-08 CRF450R, 05-09 CRF450X
Kawasaki: 06-10 KXF250
Suzuki: 01-07 RM125, 04-08 RM250, 07-10 RMZ250, 05-10 RMZ450
Retail: $49.99/set
_______________________________________________________________________________________

48MM SHOWA-KYB PRESSURE SPRINGS
Designed for the 48mm Showa or KYB Twin Chamber forks. Added performance and plushness!
Available
in 2.1kg or 2.3kg.
Yamaha: 06-10 YZ125/250, 06-10
YZ250F/450F
Kawasaki: 05-07
KX250, 06-10 KX450F, 08-09 KLX450R
Honda: 48MM
Showa 2010 CRF250
48MM KYB 09-10
CRF450
Retail: $49.99/set
___________________________________________________________________________

New! KYB 48MM HONDA OIL
LOCK SET
These have the same performance gains as the Showa Oil Lock Valves. These are used in the new
2009-2010 CRF450 48mm KYB forks. Better bottoming control guaranteed!
Honda: 09-10 CRF450
Retail: $54.99
_______________________________________________________________________________________

SHOWA OIL LOCK SET
Improved bottoming control. Improve plushness with less oil load and have better bottoming control and rider stability.
Also gives more progressive feeling from initial stroke.
These parts are used and tested by Team MB1 Honda. Same parts that come with the SHOWA Works kits! Added
Performance parts for aggressive, heavier, or any rider looking to add bottoming control.
Suzuki: 01-02 RM125, 07-10 RMZ250, 07-10 RMZ450
Honda: 97-07 CR250, 04-09 CRF250R, 02-08 CRF450
Kawasaki: 06-09 KX250F
Retail: $54.99
_______________________________________________________________________________________
KYB OIL LOCK SET
Better bottoming control for the new KYB forks. These parts are
built the same as the Showa oil locks and provide superior bottoming control who demand the most performance out of their
forks..
Yamaha: 06-07 YZ125, 06-07 YZ250, 06-07 YZ250F, 06-07 YZ450F
Kawasaki: 07 KXF450
Retail: $54.99
_______________________________________________________________________________________

KYB WORKS FORK CAPS
Anodized fork caps to give a factory look and a finer adjustability. Std
caps have 2 clicks per turn. These parts have 4 clicks to each turn.
Honda: 09-10 CRF450
Yamaha: 06-09 YZ125-450F
Kawasaki: 06-07 KXF450
Retail: $199.95
_______________________________________________________________________________________

KYB FORK SPRING PRELOAD
SPACERS
Do you need to adjust
the ride height of your front fork? These new parts for the KYB Forks are available in 2.5mm, 5mm and 10mm
Retail: $19.95
_______________________________________________________________________________________

SHOWA SPRING GUIDE PRELOAD SPACER
Through countless hours of testing, the Fork Preload Spacer has been designed to compensate for the
problem of too much preload on some models of the Showa stock forks. The end result is a more positive feeling from your
front forks.
Honda: 05-07 CR250, 05-07 CRF250R/X, 05-07 CRF450R/X
Retail: $19.99/set
_______________________________________________________________________________________

SHOWA LOW SPEED VALVE SET
Helps fork ride higher in the stroke on bumps and jumps. More control and reduces fork dive and bottoming. Perfect
for any application MX-SX-AX -Supermoto
Suzuki: 04 RM125, 07-08 RM250, 07-08 RMZ250/450
Honda: 97-03 CR250, 02-03 CRF450R, 08 CRF250, 08 CRF450
Kawasaki: 06-09 KXF250
Retail: $54.95/set
_______________________________________________________________________________________

KYB ROD END REPLACEMENT
A must have item for any KYB fork.. A replacement rod end that
gives the valver plenty of room for their valving and enough space for your nut to torque. We recommend changing these parts
whenever the std nut has been grinded off and valving changes are necessary. Comes in a pair..
Retail: $49.99
This is a required part for any KYB fork having valving work done.